Simple wall light-lamp
This wall lamp gives a smooth and even illumination. This is achieved by the fact that light is reflected from external obstacles and scatters. This kind of luminaire can be assembled for 30 minutes if you wish, having everything at hand, of course. This wall light consists of only two C-shaped aluminum profiles. And an LED strip with a power supply. Also if you are going to repeat my lamp, then you will need another glue based on epoxy. And so, let's start. I chose a wall over the sofa. Made measurements and decided on a long backlight. The shape of the lamp was chosen arbitrarily. I decided to place the profile rulers at a short distance so that you could just hang the lamp on two hooks sticking to the sides of the wall that were left from past owners.
I decided to saw off several small parts of the profile with them and provide this distance. I spread the epoxy glue, put the sides on them and fixed them, leaving them to dry.
This was my first experience using epoxy-based glue, and it is very unfortunate. It would be better if I took small screws with nuts ... Okay, I glued profiles together. But when it came to sticking the LED tape, everything went in the wrong direction. As a result, I drilled a hole from the back side and inserted wooden caps that will hold the tape.
After the assembly was completed, I hung the lamp and hid the wire behind the curtain. In this design, I took the tape in a protective insulated casing.But you can also take the usual one, since low voltage 12 V power is used, there is a galvanic isolation by voltage in the power source. You can also use the RGB LED strip with the control panel and include any color of lighting depending on your mood.
Where is ChitaWho do men marryHow to stop thinking about the person you love madlyHow to wear a leopard print and not look vulgarRiddle for the speed of three sons and wealth: who will receive an awardHow to grow persimmonRare shots of Natalia Vodianova with children