Soft plastic bottle stool
To make a soft chair from plastic bottles you will need: • 1.5-liter plastic bottles - 24 pieces; • scotch; • scissors; • wooden box for vegetables; • • knife; • • not needed sweater; • foam rubber; • • fur flap; • • threads; • needle. The required number of plastic bottles is divided in half, half of them cut off the top with a cork and is thrown away. The remaining bottom blank is put on the whole bottle. Such details are collected by 12 pieces. Now, every three parts with each other are fastened with adhesive tape, 4 rectangular blanks should turn out.
Prepared bottles are inserted into a wooden box, tightly pressed and fixed with adhesive tape in this state. If bottles are selected with the indicated capacity, they are firmly seated in the box, and no additional binding is required.
Next, a chair cover is prepared from any sweater out of use. The upper part with sleeves is trimmed, and the lower part is put on the chair. A rectangle with sides of 30 and 40 cm is cut from a piece of foam rubber of any desired thickness. For a covering of the seat, a flap of fur measuring 46 * 56 cm is cut.In the corners, the fur is cut at a right angle and stitched, as shown in the photo. The prepared cover is put on the foam rubber and placed on the chair. At the corners, the cushion is attached to the sweater's fabric with a needle thread.
A soft highchair is ready and can withstand weight up to 100 kg.
Piercing history: 100 years in 3 minutesWhat to do if the husband does not want to workHow to make a hatch in minecraftHow to choose a skiWhich graphics card is betterHow to create Windows Live